Paying Tribute

The Si is back! That was the headline to read in many magazines during the Fall issues of a few publications I was obsessed with back in '98. The Civic Si, the car that sparked a revolution with many of us here and all over the world, popped back up on the scene in 99, sporting what we all dreamed of in the engine bay! 1.6L, 160 hp, a short geared transmission, and 8000 rpm of revving pleasure. All thes features made sure that this car would be known throughout the tuner industry. Not only did it have the engine, but everything about this car was set apart. The colors, Flamenco Black Pearl, Milano Red (which I have sitting in my driveway right now undergoing some mods :smile: ), and the ever so known and popular Electron Blue Pearl. The Interior, the cluster, the floor mats.everything was special.

When David Glen laid eyes on the Si, also known as the EM1 for chassis code's sake, he was hooked immediately. And since he has owned his Si since 99, we will call him an OG!

Looking at the car, you cannot help but notice the all black approach, so we will start with the wheels! Looking at this, and the rest of the car, you can tell that no expense was spared to make David's vision of his perfect car come together. The first thing that jumps out from the car is the wheel and brake combo. In classic form, David went with the Spoon SW-388 wheels made by Desmond. To bring out the baller status, the 16" was sourced from a car in Canada. These 16's sport the Spoon Sports logo sticker, not a common piece you see on these rare wheels. To be even more of an outstanding setup, David grabbed up a set of Spoon Brake calipers for his EM1. Everyone knows the brakes, which are commonly used for everything from the show car to the race setup. Wanting the ultimate in feel for his Si, David applied these pristine Spoon wheels with a set of Falken Azenis 615's for his daily driving rollers.

The body of the car is damn near stock. I was shocked to learn that this car still had the stock paint job! Yes, stock paint job and by looking at the pics, it's hard to believe. David scooped up some JDM goodies for the outside of the ride like some parts from the Civic Type R. The mirrors, headlamps, fenders, side markers, and accessory window visors give this Si a look apart from the rest with just common mods. David has 2 front bumpers. The Backyard Special, which wasn't on in this photo shoot, and his stock bumper accompanied by a Carbon VIS lip. I liked this lip a lot because of the way it mounts. Instead of mounting from the top like many cheap copies, it mounts from the bottom, which is more like a stock lip. Yes, in the pictures that is a stupid hurts band aid. The lip has damage. Many people will try and hide it, but we drive our cars folks! This is the type of cars we want to bring to you, REAL CARS that are REALLY driven. The carbon doesn't stop at the lip though. David had to have the trunk lid as well. All of us coupe owners went nuts when that trunk lid dropped. It was like the finishing touch to everyone's carbon goodies on the outside of their ride, especially if your car wasn't black!

The interior is probably what made me and many others actually want the Si the most. The seats, the cluster especially, the dash setup on the 99-00 civic which was different from the 96-98, and the amber lighting made it stand out so much. David agreed with me, although looking at David's car it looks like he ditched pretty much everything besides the cluster! No backseat at all, it's all gone! In place is just a carbon kevlar fuel pump cover. Classy eh? Well David really went all out with the CTR parts on the interior. How hot is that Spoon steering wheel? Red stitching makes it stand out like crazy in the interior. The red Recaros, stock in the Civic Type R, were used along with the Type R door panels, coin pocket, shift boot, floor mats, armrest delete, and even the freaking carpet was used. Everything from the interior of the CTR is normally sought after as the parts are rare. The stock Si cluster still remains, and from being a Si owner, I was proud to see that still intact.
Engine - how could one even leave this thing alone. The bay of the Si is a tuner's heaven. The motor alone is a great swap, being an extremely popular one for Hondas over the years, but this one has been blown using a Jackson Racing Supercharger among many other parts stuffed in there. Jackson Racing was one of the 1st companies to go all out on the newer Si making a host of mods including a supercharger, upgraded pulleys for more boost, ECU setups, fuel pumps and even complete packages for customers who wanted the full experience. These kits claimed to be perfect for the daily driver, and 50 state smog legal. Jackson Racing didn't disappoint, as these kids were heavily sold throughout the years and made for a very torque full setup in the Civic. No need to swap when you can make more power with the kit. And at the time of its release, the GSR and Type R motor swaps were still in the $3500+ range making this kit very sellable. If you look down in the pics, you can see the Full Race traction bars to put more rubber to the ground and reduce wheel hop. Hondas are very known for their traction issues. David has done a minor tuck in his engine bay deleting unused wires, hiding more wires, relocating his battery, and getting rid of his AC and power steering.

All in all, the car that David has put together is just one of many in the line of such a rare car. Sadly, these cars are now becoming the victims of thieves. Just like its big brother, the Integra Type R, greed and the parts that these cars come stock with make them a target. David's Si is under constant lock and key. Currently he has been shipped overseas, but don't worry, the Si still gets its dose of petrol. David's mom takes the car out regularly, and is even known to redline through the gears. Seems David's mom used to be into cars herself and even used to race. She took the Si out while David was in Afghanistan, and now that he's in Asia, looks like she gets to pilot the EM1 again!
1999 Honda Civic Si

Engine:
Jackson Racing Supercharger , P28/ Hondata S200 with Boost, RC 550 injectors, Custom intake by Redzone Performance, Blox velocity stack, CTR headers, CTR valve cover, Mugen exhaust, Spoon ground wires, Spoon high tension wires, Spoon kevlar cover, Spoon oil cap, Spoon rad. cap and stay, Spoon socks, Billion radiator hoses, Hasport engine mounts

Exterior:
VIS Spoon style front lip, CTR headlights, CTR mirrors, CTR thin moldings, CTR sidemarkers, Honda Access window visors, Carbon Fiber trunk lid

Interior:
Spoon steering wheel with Momo hub, Spoon knob, CTR seats, CTR carpet, CTR floor mats, CTR shift boot, CTR Armrest delete/ shroud, CTR ADDZEST cup holder, CTR coin pocket, JDM flare, JDM airbag delete

Suspension:
Tein S.S. Coilovers, Cusco strut bars, Cusco rear tie bar, Cusco Sway bar, ASR subframe bar, Omni-Power Rear LCA's, Spoon calipers, Powerslot rotors, Hawk pads, Earls stainless steel brake lines, Skunk 2 extended studs, Rays lug nuts custom


Rims/Tires:
16" Spoon SW388's, Falken Azenis 615's
 
Nissan 240SX S14 Carbon Trunk Wing
Nissan 240SX S14 Carbon Trunk Wing
Designed for enthusiasts that wants to get noticed. Sharp lines with aggressive angles provide a jaw dropping stance. Origin Lab aerokits are produced with hand-laid FRP for flexibility and strength. Origin Lab uses only the highest quality material to provide excellent fitment and quality
$279.00
AEM Short Ram Intake System for 1999 BMW 323iS 2.5L L6 Polished
AEM Short Ram Intake System for 1999 BMW 323iS 2.5L L6 Polished
When you want more horsepower and torque (and even an improvement in MPGs) for your sport compact, the AEM Short Ram Intake is your best pick. With an easy-to-mount short ram design that forces huge volumes of air right to your engine, the AEM Short Ram Intake brings your ride to life—and can even save you some hard-earned cash. The AEM Short Ram Intake starts the flow with AEM's hassle-free Dryflow Performance Filter. Masses of air flow through the filter and down the mandrel-bent aluminum intake tube, which also tricks-out your engine compartment with a Red, Blue or Polished finish. Best yet, the AEM Short Ram Intake does not require hours of installation time to make your engine run and look cooler. Complete instructions and a full hardware kit help you mount the AEM Short Ram Intake in about an hour. And, your AEM Short Ram Intake carries a Lifetime Warranty. When it comes to performance, it is the real deal.
$194.20
AEM Cold Air Intake System for 1999-2005 Volkswagen Jetta 2.0L L4 Blue
AEM Cold Air Intake System for 1999-2005 Volkswagen Jetta 2.0L L4 Blue
Get your intake system running cool as can be with the AEM Cold Air Intake. Thanks to a custom design that locates the filter outside the engine compartment, AEM Cold Air Intakes rush cooler air straight into your sport compact like no other intake setup can. The AEM Cold Air Intake starts with innovative AEM Dryflow filter technology, feeding faster, cooler air through the mandrel-bent aluminum intake pipe. That intake pipe is a stunner, too—most AEM Cold Air Intakes come with your choice of a Blue, Red, Gun Metal Gray or Polished finish. Thanks to detailed instructions and AEM's soft-mount hardware kit, installing the AEM Cold Air Intake is a breeze. All you need are standard tools and about an hour to start feeling the extra horsepower and torque. Best yet, AEM stands behind your AEM Cold Air Intake with a Lifetime Warranty. Order today, and have the coolest-running, coolest-looking sport compact on the block.
$254.46
AEM Series 2 Plug and Play Programmable Engine Management System for 1999-2003 Nissan Skyline RB26DETT Manual Only
AEM Series 2 Plug and Play Programmable Engine Management System for 1999-2003 Nissan Skyline RB26DETT Manual Only
AEM's Series 2 Programmable Engine Management System is more powerful than its predecessor. In addition to more robust hardware, there are several improvements over the original EMS, noted in the chart below. Like its predecessor, AEM's Series 2 Plug & Play EMS plugs directly into a vehicle's factory ECU harness and requires no additional wiring or hardware. Windows™ compatible software (2000, XP, NT, 98, 95, ME) makes the task of copying, viewing and manipulating data as simple as a click of the mouse. Our new AEMTUNER software is infinitely adjustable software and allows tuners to program virtually any combination of engine control, power adders and auxiliary devices, and accurately delivers proper amounts of fuel and correct ignition timing for any boost level or operating condition.

Legal in California only for racing vehicles which may never be used upon a highway.
$1,798.20
AEM Cold Air Intake System for 1999-2005 Volkswagen Golf 2.0L L4 Polished
AEM Cold Air Intake System for 1999-2005 Volkswagen Golf 2.0L L4 Polished
Get your intake system running cool as can be with the AEM Cold Air Intake. Thanks to a custom design that locates the filter outside the engine compartment, AEM Cold Air Intakes rush cooler air straight into your sport compact like no other intake setup can. The AEM Cold Air Intake starts with innovative AEM Dryflow filter technology, feeding faster, cooler air through the mandrel-bent aluminum intake pipe. That intake pipe is a stunner, too—most AEM Cold Air Intakes come with your choice of a Blue, Red, Gun Metal Gray or Polished finish. Thanks to detailed instructions and AEM's soft-mount hardware kit, installing the AEM Cold Air Intake is a breeze. All you need are standard tools and about an hour to start feeling the extra horsepower and torque. Best yet, AEM stands behind your AEM Cold Air Intake with a Lifetime Warranty. Order today, and have the coolest-running, coolest-looking sport compact on the block.
$254.46
Stroker Kit for Subaru EJ257 STi - 83mm Stroke Billet Crank with BC625+ Rods and Custom Pistons
Stroker Kit for Subaru EJ257 STi - 83mm Stroke Billet Crank with BC625+ Rods and Custom Pistons
The BC stroker kit for the Subaru EJ25 engine utilizes a custom, 83mm monster stroke, steel billet crankshaft, not a reworked factory EJ25 crank. Depending on bore size that you decide, the BC kit will take you up to a 2.71L with a safe 102mm bore. As usual, each BC kit features custom CP forged aluminum pistons, premium alloy wrist pins, full ring pack and buttons. Big time power and torque gains. BC Econo rods rated to 600 horsepower, BC Pro Series rods rated to 800+ horsepower.
$3,350.54