Black Beauty Supra

The Supra - one of the greatest cars ever created. With RWD Turbocharged power, the Supra is still arguably one of the best street vehicles ever produced on the stateside. The 2JZ engine has now dominated the Pro RWD circuit in drag racing, displaying its true attributes in obtaining reliable and high horsepower figures. Danny's Supra has gone over many many changes throughout the year since he purchased it. I've known Danny for over 5 years now and have watched this Supra go from an automatic stock baby to a 6 speed T-78 powered beast.

When the Supra first debut on the states, many people made snide remarks about the spoiler it sported on the rear. To this day, people can still argue about the high spoiler, but there's no argument here on Danny's Supra. Danny opted to remove it, giving the Supra a menacing and sleek style throughout the entire car. Accenting the front end is a Wings West lip and a Euro Spec Supra factory hood scoop, that just gives a slight hint of what's underneath in the bay.

The 2JZ motor has gotten its fair share of goodies. Danny grabbed a GReddy T-78 turbo upgrade kit off the shelf, and converted the TT into a single turbo monster. Peeking from behind the front bumper is an HKS Type S front mount intercooler that feeds off 20 pounds of boost. Additional fuel is added to the Supra courtesy of twin Walbro fuel pumps and an Aeromotive fuel pressure regulator. Fuel tuning is a priority in any heavily boosted vehicle, and Danny has that under control with the 720cc injectors and a HKS fuel rail. A GReddy wastegate regulates the pressurized boost, while a TiAl blow off valve relieves the built up pressure in between shifts. Several components under the hood has received a polishing job, making the engine bay as clean as can be. Last but not least, the exhaust fumes cut through a custom 3.5 inch downpipe and dumped out of an APEXi GT Spec exhaust.
With the exoticness of a Supra, Danny couldn't settle for any wheels less than HRE's. Up front are 19x9 HRE 549's in a fine polished finish, and in the rear is a nice wide pair of 19x11 549's in a matching finish. Lowered on Eibach Springs, the car sits perfectly on the 19's.

Standard electronics are utilized in tuning the Supra, including an APEXi S-AFC and a GReddy Profec B boost controller. The car overall is kept clean and simple on the outside, but holds well over 550whp underneath the hood. It prowls the streets daily so be on the lookout, this is one Supra that's far from the tame beast Toyota released and discontinued.
Engine:
GReddy T-78 Turbo Kit, HKS Type S FMIC, Twin Walbro Fuel Pumps, Aeromotive Fuel Pressure Regulator, 720cc Injectors, HKS Fuel Rail, GReddy Wastegate, TiAl Blow Off Valve, Custom 3.5 downpipe, A'PEXi GT Spec Exhaust

Exterior:
Shaved rear spoiler, Wings West front lip, Euro Spec Supra factory hood scoop

Electronics:
APEXi S-AFC, GReddy Profec B

Wheels/Brakes/Suspension:
Eibach Springs, 19x9 / 19x11 HRE 549
 
Dual Valve Springs for Honda and Acura B18A B18B B20B
Designed for high rpm, BC valve springs are wound from only the highest grade, super clean, chrome silicone alloy and feature proprietary processing procedures for consistent pressures. BC titanium retainers are CNC machined from 6AL4V round bar titanium to exacting tolerances. Use steel retainer for high mileage applications.
$216.11
AEM High Volume Fuel Rail for 1992-1995 Honda Civic CX, DX, LX and EX D15 and D16 Black
AEM High Volume Fuel Rail for 1992-1995 Honda Civic CX, DX, LX and EX D15 and D16 Black
AEM High Volume fuel rails feature a 1/2-inch fuel bore to support fuel flow for applications up to 1,000 horsepower. This large bore also dampens backpressure pulses created by larger injectors and works perfectly with stock injector sizes. An additional 1/8th NPT port is included to accommodate a nitrous set up or fuel pressure gauge. A custom fuel line fitting is included for the factory fuel line, and the ends of each rail are pre tapped to accept -6 AN or 9/16"x18 fittings for users who want to use custom fuel lines.
$126.00
Stroker Kit for Honda F20C F22C - 97mm Stroke Billet Crank with bRODS Rods and Custom Pistons
Stroker Kit for Honda F20C F22C - 97mm Stroke Billet Crank with bRODS Rods and Custom Pistons
The BC stroker kit for the Honda F Series engine platform incorporates a 97mm stroke that fits both the early model F20C as well as the late model F22C. Depending on bore size that you decide, the BC kit will take you up to a 2.47L with 90mm bore. As usual, each BC kit features custom CP aluminum forged pistons, 9310 alloy wrist pins, ring pack and buttons. Available in any desired bore and compression ratio for use in turbo or NA.
$3,114.30
Stroker Kit for Nissan VQ35DE - 86.4mm Stroke Billet Crank with bRODS with ARP2000 and Custom Pistons Balanced
Stroker Kit for Nissan VQ35DE - 86.4mm Stroke Billet Crank with bRODS with ARP2000 and Custom Pistons Balanced
The BC stroker kit for the Nissan VQ35DE engine platform incorporates a 88mm stroke, steel billet crank, BC 4340 Pro Series Billet rods rated to 1200+ horsepower. Depending on bore size that you decide, the BC kit will take you up to a 4.15L with 100mm bore. As usual, each BC kit features custom CP aluminum forged pistons, 9310 alloy wrist pins, ring pack and buttons. Available in any desired bore and compression ratio for use in turbo or normally aspirated.
$5,184.08
Exhaust Valves - 30mm for Honda and Acura K20A2 K20A K24A2
Exhaust Valves - 30mm for Honda and Acura K20A2 K20A K24A2
BC valves are made from premium stainless steel, fully machined and swirl polished for ultimate air flow. Dished head for added weight savings and increased valve control at high rpm. Standard and oversize head.
$151.13